Welcome, Guest Login

Support Center

External GNSS receivers advised

Last Updated: Dec 30, 2014 03:02PM CET

Interfacing a GNSS receiver with our inertial sensor

Interfacing a GNSSS receiver with our inertial devices is easy. 
It is possible to use:

  • The NMEA standard (GGA, RMC and ZDA messages and eventually HDT messages) 
  • The binary protocol of the GNSS receiver. SBG Systems products are directly compatible with the binary protocol of some receivers. This method should be preferred when available.

In order to ensure a good synchronization, check if your GNSS receiver is able to send a PPS signal to the inertial sensor.

Recommended GNSS Manufacturers:

When using an external GNSS receiver, we recommend a model providing all recommended NMEA outputs. The following GNSS have been tested by SBG Systems:

  • Ashtech
  • Hemisphere
  • Novatel
  • Septentrio
  • Trimble

Other third party GPS has been successfully used by some of our customers:

  • Javad
  • NavCom
  • Topcon

For other GNSS receivers please feel free to contact us.

Contact Us

  • Email Us

  • Or contact our Headquarters:

    SBG Systems S.A.S.
    1, avenue Eiffel
    78420 Carriere sur Seine
    Technical Support: +33 1 80 88 43 70 Office: + 33 1 80 88 45 00

    Or our US office:

    SBG Systems North America, Inc.
    5932 Bolsa Avenue, Suite 103
    Huntington Beach, CA 92649
    Technical Support: +1 (657) 549-5807 Office: +1 (657) 845-1771

    Web: www.sbg-systems.com

seconds ago
a minute ago
minutes ago
an hour ago
hours ago
a day ago
days ago
Invalid characters found