Environmental

Absolute Maximum Ratings

Item	Specifications
Temperature Range	-20 to 60 °C – specified range -40 to 71 °C – operating range
Pressure Range	100 Mpa
Humidity	95% @ 60°C Humidity Sealed, no limit
IP rating	IP68, 2 m, 24 h
Depth	500 m
Vibration	3g RMS – 20Hz to 2 kHz as per MIL-STD-810G (A2 range options)
Shock	500 g for 0.3 ms

Operating Conditions

Item	Specifications
Operating Temperature Range	-20 to 60 °C – specified range -40 to 71 °C – operating range
Storage Temperature Range	-40 to 85°C
Pressure Range	100 Mpa
Humidity	95% @ 60°C Humidity Sealed, no limit
IP rating	IP68, 2 m, 24 h
Depth Rating	500 m
Vibration	3g RMS – 20Hz to 2 kHz as per MIL-STD-810G (A2 range options)
Shock	500 g for 0.3 ms
Salt Spay	168 h, 5% concentration according to IEC/EN/NF Standard
Certifications	DO-178
Calibration interval	None required, maintenance fre

EMC

Item	Specifications
Conducted Emissions
Conducted Immunity
Radiated Emissions
Radiated Immunity
Common standards	MIL-STD-461 IEC-61000 IEC-60945 DO-160 FCC, IC, RED, MIC, NCC, KCC*, ANATEL, and ICASA

Calibration

Item	Specification
Calibration interval	None required, maintenance fre

ESD Sensitive Devices

Electronic equipment such as discrete components, hybrid devices, integrated circuits, printed circuit assemblies can be permanently damaged or destroyed when near or in contact with electro-statically charged objects.

Normative references :

Standards	Title
EN 61340-5-1 (2016)	Electrostatics. Protection of electronic devices from electrostatic phenomena – General Requirements
EN 61340-5-2(2007)	Electrostatics. Protection of electronic devices from electrostatic phenomena – User guide
IEC 61340-5-3(2015)	Electrostatics, Protection of electronic devices from electrostatic phenomena – Properties and requirements classification for packaging intended for electrostatic discharge sensitive devices

Handling

ESD sensitive devices must be handled only in static-protected environment.

According to reference standards above, each ESD protection equipment such as grounding strap, bench matting, floor matting and ground cord must be tested before handling ESD sensitive devices. In addition, it is strongly recommended to wear ESD smocks during all service procedures.

Transport and storage

ESD sensitive devices are supplied in ESD protective packaging such as ESD shielding bags.

ESD sensitive devices and ESD protective packaging are identified with specific labels.

ESD sensitives devices must be stored in ESD protective packaging before final assembly.

Environmental Statements

RoHS Statement

Quanta product line complies with European Union (EU) Directive 2002/95/EC on the restriction of the use of certain hazardous substances in electrical and electronic equipment (RoHS Directive).

Conformity reports are available upon request.

REACH Statement

Quanta product line complies with European Union (EU) Directive 2006/1907/EC on the production and use of chemical substances, and their potential impacts on both human health and the environment.

WEEE Statement

Quanta product line comply with the European Union (EU) Directive 2002/96/EC on waste electrical and electronic equipment (WEEE). The purpose of this Directive is the prevention of waste electrical and electronic equipment, and in addition, the reuse, recycling and other forms of recovery of such wastes so as to reduce the disposal of waste. If purchased in the European Union, please return the products at the end of its life to the supplier from which it was purchased.