Download PDF
Download page Cables.
Cables
CA-ELI-USB-3M
This 3 meters long cable provides an easy connection of an Ellipse device to any PC.
The USB plug includes an RS-232 to USB converter, and provides power to the Ellipse sensor.
Weight: 103g.
CA-ELI-D-USB-3M (for older generation of Ellipse)
This 3 meters long cable provides an easy connection of an Ellipse-D device to any PC.
It includes a 2.1mm jack DC power input connector in addition to the USB plug with an RS-232 to USB converter.
This cable is not needed for the 3rd generation of Ellipse-D which can be powered directly with USB.
Weight: 110g.
CA-PSU-12V-1.5M
This 1.5 meters long AC/DC international power supply can be used to provide power to an Ellipse sensor from an 110/220V AC power plug.
It supports US, UK and Europe standards and includes a standard DC 2.1mm barrel plug. The output voltage is 12V.
CA-ELI-RS232-CAN-3M
This cable provides access to the Ellipse Main and Aux connectors. It is designed to communicate in RS-232 with the Ellipse B1 versions, but can also be used with the Ellipse B2 versions and Aux connectors. It has the following characteristics:
- 1x UP01L07 M010S BK1 Z2ZA connector.
- 1x open end.
- Water proof.
- 3 meters long.
- Weight: 77g.
Cable wiring is the following:
Pin on Fischer connector | Color | Main connector signal non CAN (B1) version | Main connector signal CAN (B2) version | Aux connector signal Ellipse-E |
|---|---|---|---|---|
| 1 | GREEN | SYNC IN A – ODO B | SYNC IN A – ODO B | SYNC IN C |
| 2 | BLUE | SYNC IN B – PORT B RX ODO A | SYNC IN B – PORT B RX ODO A | SYNC IN D |
| 3 | RED | VIN | VIN | PORT D RX |
| 4 | BLACK | GND | GND | GND |
| 5 | N/A | Not connected | Not connected | Not connected |
| 6 | BROWN | SYNC OUT A | SYNC OUT A | SYNC OUT B |
| 7 | WHITE | PORT E TX | CAN L | PORT C RS422 TX+ |
| 8 | YELLOW | PORT A RS232 TX | PORT A RS232 TX | PORT C RS232 TX PORT C RS422 TX- |
| 9 | ORANGE | PORT A RS232 RX | PORT A RS232 RX | PORT C RS232 RX PORT C RS422 RX+ |
| 10 | GREY | PORT E RX | CAN H | PORT C RS422 RX- |
CA-ELI-RS422-3M
This cable provides access to the Ellipse Main and Aux connectors. It's designed to communicate in RS-422 with the Ellipse B1 versions, but can also be used with the Ellipse B2 versions and Aux connectors. It has the following characteristics:
- 1x UP01L07 M010S BK1 Z2ZA connector.
- 1x open end.
- Water proof.
- 3 meters long.
- Weight: 77g.
Cable wiring is the following:
Pin on Fischer connector | Color | Main connector signal non CAN (B1) version | Main connector signal CAN (B2) version | Aux connector signal Ellipse-E |
|---|---|---|---|---|
| 1 | GREEN | SYNC IN A – ODO B | SYNC IN A – ODO B | SYNC IN C |
| 2 | BLUE | SYNC IN B – PORT B RX ODO A | SYNC IN B – PORT B RX ODO A | SYNC IN D |
| 3 | RED | VIN | VIN | PORT D RX |
| 4 | BLACK | GND | GND | GND |
| 5 | N/A | Internally connected to GND for RS-422 comm | Internally connected to GND | Internally connected to GND |
| 6 | BROWN | SYNC OUT A | SYNC OUT A | SYNC OUT B |
| 7 | WHITE | PORT A RS422 TX+ | CAN L | PORT C RS422 TX+ |
| 8 | YELLOW | PORT A RS422 TX- | PORT A RS232 TX | PORT C RS232 TX PORT C RS422 TX- |
| 9 | ORANGE | PORT A RS422 RX+ | PORT A RS232 RX | PORT C RS232 RX PORT C RS422 RX+ |
| 10 | GREY | PORT A RS422 RX- | CAN H | PORT C RS422 RX- |
CA-ELI-SPLIT-RS232-DB-0.5M
This cable provides an easy access through standard DB-9 plugs, to the different functions accessible on the ELLIPSE Main port.
The cable is composed of the following elements:
- 1x UP01L07 M010S BK1 Z2ZA connector.
- Total length of 50cm (25cm before / after cable splitter).
- 2x Male DB-9 plugs.
- 1x DC 2.1mm jack socket for power supply input.
- Weight: 130g.
Cable wiring of the two DB-9 connectors is the following:
Pin on DB-9 “PORT A” | Function |
|---|---|
| 1 | - |
| 2 | PORT A RX |
| 3 | PORT A TX |
| 4 | - |
| 5 | GND |
| 6 | - |
| 7 | - |
| 8 | - |
| 9 | - |
Pin on DB-9 “SYNC/PORT E” | Function |
|---|---|
| 1 | SYNC IN A |
| 2 | PORT E RX |
| 3 | PORT E TX |
| 4 | SYNC OUT A |
| 5 | GND |
| 6 | - |
| 7 | - |
| 8 | SYNC IN B |
| 9 | - |
The DC Jack plug is wired with VCC on the central pin and GND on the outer pin.
CA-ELI-SPLIT-CAN-DB-0.5M
This cable provides an easy access through standard DB-9 plugs, to the main serial port as well as the CAN bus output on the ELLIPSE.
The cable is composed of the following elements:
- 1x UP01L07 M010S BK1 Z2ZA connector.
- Total length of 50cm (25cm before / after cable splitter).
- 1x Male DB-9 plugs (for serial PORT A).
- 1x Female DB-9 plug (for CAN bus).
- 1x DC 2.1mm jack socket for power supply input.
- Weight: 130g.
Cable wiring of the two DB-9 connectors is the following:
Pin on DB-9 “SYNC/PORT A” | Function |
|---|---|
| 1 | SYNC IN A |
| 2 | PORT A RX |
| 3 | PORT A TX |
| 4 | SYNC OUT A |
| 5 | GND |
| 6 | - |
| 7 | - |
| 8 | SYNC IN B |
| 9 | - |
Pin on DB-9 “CAN” | Function |
|---|---|
| 1 | - |
| 2 | CAN L |
| 3 | GND |
| 4 | - |
| 5 | - |
| 6 | - |
| 7 | CAN H |
| 8 | - |
| 9 | - |
The DC Jack plug is wired with VCC on the central pin and GND on the outer pin.
CA-ELI-SPLIT-AUX-RS232-DB-0.5M
This cable provides an easy access through standard DB-9 plugs to the AUX serial port of ELLIPSE E. It can be used for data output as well as connecting external GNSS receiver.
The cable is composed of the following elements:
- 1x UP01L07 M010S BK1 Z2ZA connector.
- Total length of 50cm (25cm before / after cable splitter).
- 2x Male DB-9 plugs (for serial PORT C and D).
- Weight: 120g.
Cable wiring of the two DB-9 connectors is the following:
Pin on DB-9 “PORT C” | Function |
|---|---|
| 1 | SYNC IN C |
| 2 | PORT C RX |
| 3 | PORT C TX |
| 4 | SYNC OUT B |
| 5 | GND |
| 6 | - |
| 7 | - |
| 8 | - |
| 9 | - |
Pin on DB-9 “PORT D” | Function |
|---|---|
| 1 | SYNC IN D |
| 2 | PORT D RX |
| 3 | - |
| 4 | - |
| 5 | GND |
| 6 | - |
| 7 | - |
| 8 | - |
| 9 | - |