It is also possible to enable Marinestar™ via NTRIP. After sending the requested information to Fugro (see the article Marinestar™ PPP activation), they will send the required information to connect to the service via NTRIP.

This document will contain :

    • NTRIP caster address and port.
    • User ID
    • Password
    • NTRIP mount point to use.

Configuration of the NTRIP in the INS Web Interface

Once you have received the information, in the configuration menu of the SBG systems INS web interface, section Aiding Assignment, differential correction should be enabled to be received via NTRIP.

Then, the information sent by Fugro can be entered in the NTRIP configuration and authentication in the Aiding Settings section.

ntrip

Marinestar activation

After saving the configuration. The next step is to check RTCM and NTRIP status, in the Status tab, Aiding input section of the web interface.

NTRIP status

After checking that the system is receiving RTCM corrections and that the NTRIP client is connected to the server, it is now possible to contact Fugro to send the activation signal. Please specify the mount point.

Verification

It is possible to check that the signal is well received thanks to the status displayed in the SBG Systems Web interface:

PPP Int