This step by step guide explains how to retrieve the PULSE device information such as the serial number, hardware code, revision, firmware version etc.

Before we start

The PULSE implements the sbgInsRestApi protocol over a serial interface. All available configurations and commands are detailed in the Digital interfaces page. All the examples use the sbgEComApi command line tool.

In this guide, we consider a PULSE connected to a Windows computer on the serial COM12 and using the default 921600 bps baud rate.

Read Device Information

A simple GET command is used to retrieve the device information:

sbgEComApi.exe -s COM12 -r 921600 /api/v1/info -g

The device answer should be:

{
   "productCode":"PULSE40-43T-01",
   "serialNumber":"000012345",
   "hwRevision":"1.0.0.0",
   "calibVersion":"2.0.498-stable",
   "fmwVersion":"1.1.1630-stable",
   "btVersion":"1.9.155-stable"
}