In case you have changed some parameters and would like to keep the configuration after a Switch off/on, you have to save the configuration to FLASH memory.

Before we start

The PULSE implements the sbgInsRestApi protocol over a serial interface. All available configurations and commands are detailed in the Digital interfaces page. All the examples use the sbgEComApi command line tool.

In this guide, we consider a PULSE connected to a Windows computer on the serial COM12 and using the default 921600 bps baud rate.

Save New Settings

Don't forget to save your new settings if you would like to keep them for the next power cycle. Simply send the command below:

sbgEComApi.exe -s COM12 -r 921600 /api/v1/settings/save -p

The device answer should be:

{"title":"request successful","needReboot":false}

You can switch off your Pulse-40, your configuration is saved.