All mechanical, electrical maximum ratings, characteristics, connector pin-out and specifications.

Overview

Present the board and its main features

Figure : Real or 3D view of the board with the product

Mechanical Specifications

.STEP files : Product
- External Shape / Skin of the product without internal details

Absolute Maximum Ratings

Item	Rating	Unit
VCC to GND		V
RS232 Inputs to GND		V
RS232 Ouputs to GND		V
CANH, CANL relative to GND	± 80	V
All pins to signal GND	-0.3 to 5.5 V	V
All input pins clamp current	-50	mA
All output pins clamp current	50	mA
VDD, EN ESD Rating - Human-body model (HBM), per ANSI/ESDA/JEDEC JS-001	±1500	V
VDD, EN ESD Rating - Charged-device model (CDM), per JEDEC specification JESD22- C101	±500	V
VDD_IO & All other IO pins ESD Rating - Human-body model (HBM), per ANSI/ESDA/JEDEC JS-001	±8000	V
VDD_IO & All other IO pins ESD Rating - Charged-device model (CDM), per JEDEC specification JESD22- C101	±1000	V
ESD protection (Tx, Rx, Input & Output pins, CANH, CANL)	± 15	kV
RESERVED pins - Human-body model (HBM), per ANSI/ESDA/JEDEC JS-001	±1000	V
RESERVED pins - Charged-device model (CDM), per ANSI/ESDA/JEDEC JS- 002	±250	V

Precaution about ESD

Refer to : Handling Section

Recommended Operation

Item	Condition	Unit
Input Voltage Range	-	V
Typical Power Consumption	Over full Input Voltage Range with/without GNSS Antennas	W
Current Consumption	VCC - GND = +	mA
Reverse Voltage Protection		V

Pinout Table :

Contacts	Signals	Type	Connection Tips	Comment
1

Refer to Mechanical Specifications for more details about onboard and mating connectors

Item	Min.	Typ.	Max	Unit
RS232 Inputs, Sync In pins Input low level voltage Input high level voltage Weak pull-up equivalent resistor Output low voltage Output high voltage Output drive current Output high to low fall time Output low to high rise time Output Frequency Input Capacitance 2 pF
Input range	-15	-	+15	V
Low level threshold	0.6	-	-	V
High level threshold		-	2.0	V
Input resistance	3	5	7	kΩ
RS232 Outputs pins
Output range	+/-5	+/-5.5	-	V
CAN bus
Recessive Bus Voltage	2	2.5	3	V
CAN H Output Voltage dominant	2.75	3.5	4.5	V
CAN L Output Voltage dominant	0.5	1.25	2.2	V
Absolute input voltage CANH, CANL	-58		58	V
Differential input voltage CANH, CANL	0.5	0.7	0.9	V

Isolation

- Parameter Condition Min Nominal Max Unit
- Isolation Voltage
- Working Isolation Voltage
  - Power ground relative to Signal ground
  - Signal ground relative to Signal ground

The table below lists the accessories supply with DK-QUANTA and SK-QUANTA :

Item	Description	SBG-Systems P/N	Qty
			1