Reusable Content Space
Page tree
Skip to end of metadata
Go to start of metadata

You are viewing an old version of this page. View the current version.

Compare with Current View Page History

« Previous Version 2 Next »

  • Overview
    • Mounting Holes
    • I/O Connector Identification
    • RF Connector Identification
  • Specification
    • Size
    • Weight
    • I/O Connector
      • Identification, Manufacturer, Manufacturer P/N, Description
    • RF Connector
      • Identification, Manufacturer, Manufacturer P/N, Description
    • Fastening
      • Recommended Fasteners
      • Recommended Torques : soft vs hard materials
    • Mechanical Dimensions
      • 2D drawing extracts
        • External dimensions
        • Mounting Holes
        • Location of connectors
      • Mounting view : product on base plate
      • Mounting solutions
        • The product is designed to mount directly to a printed circuit board (PCB).
        • There are two recommended ways in which the product can be secured to the PCB.
        • The first method uses board mounted threaded standoffs, and the second method uses an aluminum x-bracket. Both methods are shown in the diagram below.
      • Drawings
        • Data
          • Housing Materials
          • Finish/Surface Treament
          • Dimensions
          • Tolerances
          • IMU center of measurement
            • mark
            • IMU center of measurement is location at X/Y center frame symbol, Right handed coordinate system
          • Details Views
            • Internal Fastening solution
              • Thread Locker : Loctite
              • Screw Staked with: Hysol/Loctite EA - 0151
            • Mountning Hole Details View
              • Alignment / Locating holes
                • Hole on primary connetor side is circular. (Detail B)
                • Hole on auxiliary connector side is oval shape. (Detail C)
                • Recommended Locating/dowel pins : 3mm
              • Mounting Holes
                • Recommended mounting fasteners : ( M3 x 0.5 x 6-8mm [4-40 x 1/4] SOHC )
              • Grounding Points
                • Locations
                • Dimensions
                • Finish
                  • Passivated : SURTEC 650, ALODINE 1132
                  • Anodized
                    • Color
                    • Thickness
                  • Comments
                    • Anodization has been milled off the bottom surface of the four feet.
                    • Electrical resistivity of primary or auxiliary connector housing to surface of feet is less than 2.5 mOhm
                  • Connector Details Views
                    • Identification / Naming
                    • Notch / Pin Index location
                    • Pin arrangement & numbering
                  • Sensitive Components
                    • Type of component : Magnetometer
                    • Location
                    • Keepout areas
  • No labels