Specifications
Product Mechanical specifications
General Data
| Item | Specifications |
|---|---|
| Dimensions | |
Weight | |
| Enclosure Materials | |
| Surface Treatments | |
| Mounting Holes | |
| Alignement Holes |
- Figure ( Gliffy Diagram : Product_Mechanical_Dimensions ) : showing
- 2D drawing extracts
- External dimensions
- Mounting Holes
- Location of connectors
- 2D drawing extracts
Drawings
- Preview ( PDF file : Product_Mechanical_Drawing ) : showing
- Data
- Housing Materials
- Finish/Surface Treament
- Dimensions
- Tolerances
- IMU center of measurement
- Mark
- IMU center of measurement is location at X/Y center frame symbol, Right handed coordinate system
- Details Views
- Internal Fastening solution
- Thread Locker : Loctite
- Screw Staked with: Hysol/Loctite EA - 0151
- Mountning Hole Details View
- Alignment / Locating holes
- Hole on primary connetor side is circular. (Detail B)
- Hole on auxiliary connector side is oval shape. (Detail C)
- Recommended Locating/dowel pins : 3mm
- Mounting Holes
- Recommended mounting fasteners : ( M3 x 0.5 x 6-8mm [4-40 x 1/4] SOHC )
- Grounding Points
- Locations
- Dimensions
- Finish
- Passivated : SURTEC 650, ALODINE 1132...
- Anodized
- Color
- Thickness
- Comments
- Anodization has been milled off the bottom surface of the four feet.
- Electrical resistivity of primary or auxiliary connector housing to surface of feet is less than 2.5 mOhm
- Connector Details Views
- Identification / Naming
- Notch / Pin Index location
- Pin arrangement & numbering
- Sensitive Components
- Type of component : Magnetometer
- Location
- Keepout areas
- Alignment / Locating holes
- Internal Fastening solution
- Data
CAD Models
- .STEP files : Product
- External Shape / Skin of the product without internal details
Onboard connectors
| Connector Id. | Manufacturer | Manufacturer P/N | Description | Max. Mating Cycles | Resources |
|---|---|---|---|---|---|
| MAIN | ANTELEC | AM2D-127-40-4.0-3.0-G-CMS-H25 | Connector, Male, Vertical, 40 cts, 1.27mm pitch, SMD | 500 |
|
| EXT | NICOMATIC | 201Y8L | Connector, CMM 200 Series, Male Connector, 8 cts, 2.2A, 2mm pitch, TH | 500 |
|
| A1, A2 | AMPHENOL | A-1JB | Connector, U.FL (UMCC), Jack, Vertical, 50ohm, SMD | 30 |
|
Note : SBG-SYSTEMS could use other connectors while maintaining the correct match with the corresponding connectors listed below.
Mounting
Minimum Fastening Requirements
| Mounting Holes | Thread Size | Thead Length* | Qty |
|---|---|---|---|
| Ø 2.6 +/- 0.1 mm | M2 | > 5 mm | 4 |
Recommendations
| Standard | Description | Head Bit | |
|---|---|---|---|
| DIN 912 | |||
| Thread Size | Torque | Thread Locker | Blocking Resin |
|---|---|---|---|
| M2 | < 0.3 N.m | Recommended | Can be used |
Mounting solutions
- The product is designed to mount directly to a printed circuit board (PCB).
- There are two recommended ways in which the product can be secured to the PCB :
- The first method uses board mounted threaded standoffs
- The second method uses common components
Board mounted threaded standoffs method
- Figure ( Gliffy Diagram : Product_Mechanical_Integration_Solution-#1 ) : showing
- Mounting view : product on base plate / PCB
Spacer and Nuts method
- Figure ( Gliffy Diagram : Product_Mechanical_Integration_Solution-#2 ) : showing
- Mounting view : product on base plate / PCB
Sensor Cordinate System
Sensor Coordinate Frame
- Figure : Sensor Coordinate Frame
- 3D ISO View
- X/Y/Z Coordinate Frame
IMU Center of Measurement
- Figure : IMU Center of Measurement
- Top View, Center of Measurement
- Bottom View Center of Measurement